General Description - BEKA HAMAX 2 Mode D'emploi

General description

The hydraulically actuated grease pump BEKA HAMAX System 2 is mainly used to lubricate hydraulic hammers or other
construction machinery
For supply, the grease pump is connected with a bypass line to the supply and return lines of the hydraulic system of its carrier.
This can be done at choice via the hose lines or via direct flange connection
for connections M16 the pumps must be connected with hoses.
Model connection M14
At the time of delivery, the securing bolts, inlet screw couplings and plug screws are supplied with the pump in loose condition,
together with the appropriate seals. Depending on the application, minor assembly work may be required before
commissioning.
GB
- In case of the hose connection model, the enclosed screw couplings must be mounted. Subsequently, the grease pump's
supply and return lines must be connected to the carrier's hydraulic system via a bypass line. G1/4" screw couplings are
required for the connection of the oil and lubricant lines.
- In case of the flange connection model, the G1/4" threads must be closed by the enclosed plug screws and packing rings.
The enclosed O- rings are used to seal the flange connections.
Model connection M16
The securing bolts are supplied with the pump in loose condition at the time of delivery. The inlet couplings are already
mounted. Only the grease pump's supply and return lines must be connected to the carrier's hydraulic system with a bypass
line.
As the drive is effected via a hydraulic motor (Fig. 1 : item 9), continuous supply of lubricant is ensured. The delivery rate can
be varied with a throttle (Fig.1: item 8).
At failure of the hydraulic system a grease nipple is integrated for manual greasing (Fig. 1: item 5). To protect the lubricant
24
system, the pump comprises a pressure limiting valve which opens as soon as 280 bar have been reached (Fig. 1: item 3).
The outlet opening of the
Transparent plastic
can be used. The grease level is checked optically by the position of the visible follower piston. To be able to check the grease
level when the cartridges are almost empty, the pump casing is equipped with an inspection window (Fig. 1: item 6). The
function is checked with the visible eccentric shaft Fig
In the case of wear of the pumping element, the grease comes out of the lateral relief hole(Fig.1: item 10).
Fig. 1:
...a product of BEKA
attachments . Due to its compact design, it can be mounted directly at the
pressure relief valve is placed opposite of the cartridge holder
(Fig.1: item 7) cartridges serve as storage reservoir. Due to a adapter system different types of cartridges
3
4
5
6
7
at model connection M14 Regarding the model
( . 1: item 2 which rotates during operation. )
1 2
attachment .
.
(Fig. 1: item 1).
10
8
9