Set The Clock Manually; Time Zone Setting - Explore Scientific RDP3007 Mode D'emploi

NOTE: When using a power adapter, please increase
the separation of the main unit and the power adapter
to avoid interference of RCC signal receiving.

SET THE CLOCK MANUALLY

1. Press and hold [
and date setting.
2. The setting parameter will flash.
3. Press [ ] button once, the figure will increase 1 unit
(when setting minute, second will reset to 0). Press
and hold the [ ] button, the figures will increase
rapidly.
4. Press [ ] button once, the figure will decrease 1
unit (when setting minute, second will reset to 0).
Press and hold the [ ] button, the figures will de-
crease rapidly.
5. Press [ ] button to confirm setting and enter to
next parameter.
6. Sequence of setting: Time Zone  12/24 Hr format
 Hour  Minute  Year  Calendar Mode (day-
month/month-day)  Month  Day  Weekday
Language  °C/°F  Exit
] button to enter into time
7. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
LANGUAGE
The Language options are: English (E), German (D) 
French (F)  Italian (I)  Spanish (S)

TIME ZONE SETTING

To set a different time zone, proceed as follows:
1. Press and hold [
setting.
2. The Time zone offset setting will flash.
3. Press the [ ] button to increase or [ ] button to
decrease the Time zone offset.
°C/°F SETTING
1. Press and hold [
setting.
2. Press [ ] button several times until the display
shows °C/°F.
3. Press the [ ] or [ ] button to switch Celsius (°C) /
Fahrenheit (°F).
] button, enter time and date
] button, enter time and date
EN
IT
DE
FR
ES
9