Applications; Safety Notes - Monacor DMT-1020 Mode D'emploi

1 Applications

These digital multimeters are suitable for measuring AC
and DC voltages up to 600 V, DC currents up to 10 A, and
resistances. Furthermore, it is possible to test diodes, and
a buzzer is integrated for testing continuity. According to
model there are additional measuring functions.

2 Safety Notes

This unit corresponds to all required directives of the EU
and is therefore marked with
WARNING With this meter, very high voltages danger-
Please observe the following items in any case:
The meter is suitable for indoor use only. Protect it
against dripping water and splash water, high air humid-
ity, and heat (admissible ambient temperature range
0 °C – 50 °C).
For cleaning only use a dry, soft cloth; never use chemi-
cals or water.
No guarantee claims for the meter and no liability for any
resulting personal damage or material damage will be
accepted if the prevailing safety precautions for handling
voltages higher than 42 V are not observed, if the meter
is used for other purposes than originally intended, if it is
not correctly operated or connected, if it is overloaded, or
not repaired in an expert way.
ous to life can be measured. Particular care
must be taken when measuring voltage high-
er than 42 V! When handling the test prods,
always make sure to keep your fingers
behind the protection. Never operate the
meter if the meter or the test leads are dam-
aged. Damaged test leads must be replaced.
.
GB
13