Hach 9586sc Oxygen Manuel D'utilisation De Base page 18

Figure 5 Example of Main Measurement screen
1 Home screen icon
2 Sensor name
3 SD Memory card icon
4 Relay status indicator
5 Measurement value
6 Measurement unit
Icon Description
Home screen The icon may vary depending on the screen or menu being displayed. For example, if an SD
card is installed, an SD card icon appears here when the user is in the SD Card Setup menu.
SD memory This icon appears only if an SD card is in the reader slot. When a user is in the SD Card Setup
card menu, this icon appears in the upper left corner.
Warning A warning icon consists of an exclamation point within a triangle. Warning icons appear on the
right of the main display below the measurement value. Push the ENTER key then select the
device to view any problems associated with that device. The warning icon will no longer be
displayed once all problems have been corrected or acknowledged.
Error An error icon consists of an exclamation point within a circle. When an error occurs, the error
icon and the measurement screen flash alternately in the main display. To view errors, push the
MENU key and select Diagnostics. Then select the device to view any problems associated
with that device.
Additional display formats
• From the Main Measurement screen push the UP and DOWN arrow keys to switch between
measurement parameters
• From the Main Measurement screen push the RIGHT arrow key to switch to a split display of up to
4 measurement parameters. Push the RIGHT arrow key to include additional measurements. Push
the LEFT arrow key as needed to return to the Main Measurement screen
• From the Main Measurement screen push the LEFT arrow key to switch to the graphical display
(see Graphical display
keys to switch measurement graphs
Graphical display
The graph shows concentration and temperature measurements for each channel in use. The graph
supplies easy monitoring of trends and shows changes in the process.
18 English
Table 4 Icon descriptions
on page 18 to define the parameters). Push the UP and DOWN arrow
7 Warning status bar
8 Date
9 Analog output values
10 Time
11 Progress bar
12 Measurement parameter