Packaging And Transport; Storage - Burkert 2030 Manuel D'utilisation

Types 2030, 2031, 2031 K

Packaging and Transport

14. pacKaging and TranspOrT
noTe!
transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
• Protect the electrical interfaces of the coil and the pneumatic
connections from damage by placing protective caps on them.
15.

sTOrage

noTe!
incorrect storage may damage the device.
• For prolonged storage, slacken the housing screws to prevent
the diaphragm from becoming distorted.
• Identify slackened screws for reasons of safety!
• Store the device in a dry and dust-free location!
• Storage temperature. -40 – 55 °C.
Danger!
risk of injury during re-installation. risk of injury from
discharge of medium through slackened housing screws
(acid, alkali, hot media)!
Before re-installing the valves, ensure that the housing screws
have been tightened correctly.
• Before re-installation, check the tightening torque of the housing
screws.
English
35