Packaging And Transport; Storage; Disposal - Burkert 2030 Manuel D'utilisation

14. PACKAGING AND TRANSPORT
NOTE!
Transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
• Protect the electrical interfaces of the coil and the pneumatic
connections from damage by placing protective caps on them.
36
english
Type 2 030, 2031, 2031 K, 2032,

Packaging and Transport

15. STORAGE

NOTE!
Incorrect storage may damage the device.
• For prolonged storage, slacken the body screws to prevent the
diaphragm from becoming distorted.
• Identify slackened screws for reasons of safety!
• Store the device in a dry and dust-free location!
• Storage temperature. -40 – +55 °C.
DANGER!
Risk of injury during re-installation. Risk of injury from dis-
charge of medium through slackened body screws (acid,
alkali, hot media)!
Before re-installing the valves, ensure that the body screws have
been tightened correctly.
• Before re-installation, check the tightening torque of the body
screws.

16. DISPOSAL

→
Dispose of the device and packaging in an environmentally friendly
manner.
NOTE!
Damage to the environment caused by device components
contaminated with media.
• Observe applicable regulations on disposal and the environment.
• Observe the national waste disposal regulations.
2033, 2037