Autorized Use; Restrictions; Explosion Protection Approval; Predictable Misuse - Burkert 2030 Manuel D'utilisation

2. auTOrized use
non-authorized use of the devices may be dangerous to
people, nearby equipment and the environment.
• The diaphragm valves of Types 2030, 2031 and 2031 K are
designed for the control of contaminated, ultra-pure or sterile
media, as well as for abrasive or aggressive media (also with
higher viscosity).
The devices may be used only for media which do not attack
the housing and seal materials (see rating plate). Information on
the resistance of materials to the media is available from your
Bürkert sales office.
• During use observe the authorized data, the operating
conditions and conditions of use specified in the contract
documents and operating instructions. These are described in
the chapters "System Description" and "Technical Data".
• The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert.
• Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and
faultless operation.
• Use the device only as intended.
6
English
Types 2030, 2031, 2031 K

Autorized Use

2.1.

restrictions

If exporting the system/device, observe any existing restrictions.
2.1.1. explosion protection approval
The explosion protection approval is only valid if you use the
modules and components authorized by Bürkert, as described in
these operating instructions.
If you make unauthorized changes to the system, the modules or com-
ponents, the explosion protection approval will also be terminated.
2.2. predictable Misuse
• Do not introduce media, which attack the housing or seal mate-
rials, into the media connections of the system. The Bürkert resis-
tance table of materials can be found on the Internet at
www.burkert.com Documentation
Chemical Resistance Chart.
• Do not put any loads on the housing (e.g. by placing objects on it
or standing on it).
• Do not make any external modifications to the device housings.
not paint the housing parts or screws.
Brochures & Catalogues
Do