Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.6.
Low heating (for devices suitable for continuous use)
To use the device as a 'continuous fire', you can select the primary and secondary air
scoops in such a way you get the right burning speed. Always make sure there's
enough glow on the heating bottom.
4.7.
Ash removal
With the included "cold" hand, the shaking grate can be
moved and the ashtray can be removed from the appliance
(see image). The ash drawer must be timely emptied. The
ashes must not obstruct the passage of the combustion air-
flow, and in no case should the ash touch the underside of
the grating. If not, the grating will overheat and will be dam-
aged. You can break any caked ashes with the supplied
"poker". For the operation procedure, see figures.
Relatively speaking, burning wood produces little ash and it
will not be necessary to remove it each time daily. The ash
in the cavities between the ribs of the fire plate does not
need to be removed, since wood burns better on a bed of
ash.
4.8.
Extinguishing the fire
Stop fuelling the fire and let it burn out.
Damping a fire by closing the air slides involves the release of noxious gases. You
should let the fire burn out and keep an eye on it as long as it is still glowing.
4.9.
Weather conditions
Attention!
Mist and heavy fog will block the chimney's fume outlet and may lead to smoke
emission into the living room.
It is best not to use the stove under these weather conditions.
640GM - 760GM
640GM
760GM
32
03.27602.000
Publicité
Table des Matières
