Personnel Qualification; Skilled Personnel; Personal Protective Equipment - WIKA TGS55 Mode D'emploi

3. Safety

3.5 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
EN
Improper handling can result in considerable injury and
damage to equipment.
▶

Skilled personnel

Skilled personnel, authorised by the operator, are understood to
be personnel who, based on their technical training, knowledge
of measurement and control technology and on their experience
and knowledge of country-specific regulations, current standards
and directives, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g.
of aggressive media.

3.6 Personal protective equipment

The personal protective equipment is designed to protect the skilled
personnel from hazards that could impair their safety or health during
work. When carrying out the various tasks on and with the instrument,
the skilled personnel must wear personal protective equipment.
Follow the instructions displayed in the work area regarding personal
protective equipment!
The requisite personal protective equipment must be provided by the
operating company.
10
The activities described in these operating instructions
may only be carried out by skilled personnel who have the
qualifications described below.
WIKA operating instructions models TGS55, TGS73 with 831 (Ex)