Setting Up And Mounting - Cameo TRIBAR 400 IR Manuel D'utilisation

AU (AUTOMATIC MODE)
In this mode, the system automatically switches between programs from PG01 to PG12. The program speed is adjusted using the SP+ and
- buttons.

SETTING UP AND MOUNTING

The Cameo Tri Bars can be mounted using the mounting bracket on the left and right-hand side of the housing, either in a convenient
location on the floor or similar, or on a truss system (truss clamp not included). Please use the safety eyelets on the housing to secure the
spotlight against falling down. NOTE: Overhead installation should only be carried out by trained personnel.
8