Explore Scientific RDC1005 Mode D'emploi page 9

the display shows °C/°F.
3. Press the [ ] or [
Celsius (°C) / Fahrenheit (°F).
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set one alarm time for weekdays,
(Monday to Friday / 1-5) and one alarm time
for the weekend (Saturday to Sunday / 6-7).
Alarm 1 = Weekday alarm (1-5)
Alarm 2 = Weekend alarm (6-7)
1. Press and hold [
setting.
2. Sequence of setting: Alarm 1 (1-5) weekday
hour  weekday minute  Alarm 2 (6-7)
weekend hour  weekend minute  exit
3. During setting, the setting parameter will
flash.
4. Press [ ] button once to increase by 1
or press [ ] once to decrease by 1. Alter-
] button to switch
] button, enter alarm
natively press and hold the [
change the figures rapidly.
5. Press [ ] button to confirm setting and
enter to next parameter.
6. Press [ ] button to turn on/off alarm.
7. Alarm will turn on automatically when alarm
setting is finished.
8. If there is no action in 20 seconds, the set-
ting will be saved and will exit the setting
mode.
TURN ON/OFF ALARM
1. Press the [
off the alarm that is nearest in time. (1-5) or
(6-7) will flash to indicate which alarm was
activated.
How activate alarm times individually:
2. Press [ ] button once to switch to alarm
mode. Monday to Friday alarm time will be
shown and (1-5) will flash.
] button to
] button once to turn on/
EN
IT
DE
FR
ES
9