Safety Instructions; Work Area Safety; Electrical Safety; Personal Safety - Haussmann H2tOOlKit-18 Guide De L'utilisateur

saFetY instruCtiOns

1.Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.

2. electrical safety

a) The charger's plug must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with grounded
power tools.Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Use this battery-operated tool only with its specifically
designated battery pack. The use of any other batteries may
create a risk of fire.
c) do not expose power tools to rain or wet conditions.Water
entering a power tool will increase the risk of electric shock.
d) A battery-operated tool with integral batteries or a separate
battery pack must be recharged only with the specified
charger for the battery. A charger that may be suitable for one
type of battery may create a risk of fire when used with another
battery.

3. personal safety

a) Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the
off-position before inserting the battery, picking up or carrying the
tool. Carrying power tools with your finger on the switch or plugging
in power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e) do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected
situations.
f) dress properly. Do not wear loose clothing, neckties, or jewelry
that can get caught and draw you into moving parts. Rubber gloves
3