Haussmann H2tOOlKit-18 Guide De L'utilisateur page 10

spool cap.
• Turn the guard upside down and put it on the motor housing.
• Insert and tighten the screw provided to complete the guard
assembly.
4. Assemble the auxiliary handle (Fig. 5)
• Loosen the auxiliary handle knob
• Rotate the auxiliary handle upside to comfortable position.
• Tighten the auxiliary handle knob.
Fig.5
5. Extend the telescopic tube (Fig. 6)
• Loosen the telescopic knob
• Extend the tube to comfortable position.
• Tighten the telescopic knob.
6. Install and remove the battery (Fig.7 & 8)
Warning! Make certain the lock-off button is engaged to prevent
switch actuation before removing or installing battery
• To install battery pack, push the battery pack into the slot of the
machine, slide the battery pack until fully seated with an audible
click.
• To remove battery pack, depress the battery pack release button
in the back of the battery pack, slide the battery pack backside to
stop position and pull it out of the machine.
Fig.7
Fig.3
Fig.8
9
Fig.4
Fig.6