Auto Restart - Sharp KC-A60EU Manuel D'utilisation

SYMPTOM
When the Roller / Float was removed.
FLOAT
1. Insert the fl oat under
this tab.
3. Insert the tab on the other
side of the fl oat into the
hole.

AUTO RESTART

After a power failure, automatically resume
the operation when the power recovers.
ON
(with the unit OFF)
(simultaneously for more 3 sec.)
2. Inner the tab
of fl oat into
the hole.
Tab
Cross-Section view
If the , ,
for 10 seconds, the setting is
complete.
REMEDY (not a malfunction)
• Install the Roller / Float in order below.
ROLLER
Fix the roller in the tray from side way.
Float
Float
Auto Restart can be set.
• Even when the plug is unplugged or the breaker is
thrown during the operation, the operation resumes
at the previous operation mode and settings if the
power recovers.
CANCELLATION
(with the unit OFF)
(simultaneously for more 3 sec.)
lamp lights up
E-17
NOTE
Check the direction
of the roller.