Using I/O Link.a; One Touch Play - Pioneer PDP-504HDE Mode D'emploi

Enjoying through External Equipment

Using i/o Link.A

This system incorporates three typical i/o Link.A func-
tions for smooth connections between Media Receiver
and other audiovisual equipment.

One Touch Play

While the Plasma Display System is in standby mode, it
automatically turns on and plays back images from the
audiovisual source (e.g. VCR, DVD).
WYSIWYR (What You See Is What You
Record)
When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers channel preset information
from the tuner on the Plasma Display System to the
one on the connected audiovisual equipment (e.g. VCR)
via the INPUT 2 or 3 terminal.
Media Receiver (rear view)
SERVICE ONLY
i / o link.A
SELECT
INPUT
2
i / o link.A
SELECT
INPUT
2 3
I N OUT
CONTROL
SUB WOOFER
OUTPUT
INPUT 1 INPUT 1
3
INPUT 2 INPUT 2 INPUT 3 INPUT 3 S- VIDEO
or
SCART cable
(commercially available)
VCR or DVD Rocorder
• The i/o Link.A functions work only when the audiovi-
sual equipment is connected to the INPUT 2 or 3
terminal on the Media Receiver with i/o Link.A via a
fully wired 21-pin SCART.
• Either INPUT 2 or 3 is available for i/o Link.A, depend-
ing on the switch on the rear of the Media Receiver.
• Using this switch, select the input terminal to which
recording equipment such as a VCR has been con-
nected.
• Refer to operation manuals of each external equip-
ment for the details.
INPUT 3
COMPONENT VIDEO
Y P P
B R
MONITOR
OUTPUT
VIDEO R-AUDIO-L
AC INLET
BLACK
WHITE
SYSTEM CABLE
10
49
En