Type Plate; Product Liability; Safety; Safety Definitions - Husqvarna WS 482 HF Manuel D'utilisation

This product is in compliance with
applicable EC directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.

Type plate

Husqvarna AB, 561 82 Huskvarna, Sweden
TYPE
SERIAL No.
(YEAR WEEK No.)
RPM
OUTPUT
POWER
MADE IN SWEDEN

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General power tool safety warnings
WARNING:
instructions, illustrations and specifications
provided with this power tool. Failure to
4
®
PRODUCT No.
A
C
D
MAX.
F
Used if there is a risk of
Used if there is a risk of
Read all safety warnings,
• A: Type/model
• B: Product No.
• C: Serial No. with manufacturing date (YYYY, WW,
XXXXX): Year, Week, Sequence No.
• D: Maximum speed, RPM
• E: Maximum blade size, mm
• F: Power output, kW

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
B manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
E

Safety

• Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.

Electrical safety

• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
1675 - 001 - 11.06.2021