Memory Preset Stations; Recall Stations From Preset Memories - PERFECTPRO ROCK HART Mode D'emploi

Memory preset stations

Storing a station in preset memories, please follow steps below.
There are 6 memory presets in this radio.
1. Press the Power button to turn on the radio.
2. Tune to required station as described above.
3. Press and hold the required preset until radio beeps and shows
PX STORED and PX.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories can be over written by following
above procedures.

Recall stations from preset memories

1. Press the Power button to turn on the radio.
2. Press SOURCE button to get FM waveband.
3. Momentarily press the required Preset button, the preset number and
station frequency will appear on the LCD display.
Note:
If the station equips with RDS system and reception quality is good.
LCD display will show station name underneath station frequency.
13