First Start-Up - wallas 88DU Instructions D'installation, De Fonctionnement Et D'entretien

88DU
GB
Operation

FIRST START-UP

After installation or maintenance, if the fuel line is empty, the stove
will not necessarily start up on the fi rst try. If this is the case, the red
combustion LED will begin to blink roughly 4.5 minutes after start-up.
Turn the power switch to the OFF position. The stove cannot be re-
started until the cooling phase is complete.
When the cooling is fi nished, switch the stove on again.
If the stove does not start after two tries, it cannot be started again:
the stove will lock down (lights blink to indicate this).
Release the lock (instructions in the maintenance section)
Depending on the length of the fuel hose, the device may have to be
started up several times. Keep an eye on how the fuel travels in the
fuel hose while starting up the stove.
490070GB
- 86 -