Use Of The Stove - wallas 88DU Instructions D'installation, De Fonctionnement Et D'entretien

Use of the stove

The stove starts to heat up automatically when the power switch is turned to the
ON position. The yellow current indicator LED will light as soon as the electricity is
switched on. The red combustion indicator LED will be lit, when the burner fl ame
has been lit and the burning has stabilised after roughly 2.5 – 4 min after the stove
has been turned on.
Power adjustment knob
After the stove has been started up, the power can be adjusted steplessly with the
power adjustment knob. Avoid turning the adjustment knob back and forth rapidly,
as this can cause the burner to become sooty.
To switch off the oven, turn the power switch to the OFF position. The yellow cur-
rent LED will go out immediately. The red combustion LED will keep blinking for ca.
fi ve minutes while the device is cooling down. You cannot restart the stove until the
combustion LED has stopped blinking.
The orange indicator light at the lower edge of the stove top will light when the
stove is switched on.
After the stove is switched off, a timer will keep the light lit for roughly 50
minutes.
The orange indicator light will warn you of a hot cooking plate.
Colour Blink interval
Yellow
Red
Red
88DU
Operation
Combustion indicator LED
- 85 -
GB
Current indicator LED
Power switch
Function
Power on
Combustion indicator when the com-
bustion has begun normally
Aftercooling
490070GB