Squeegee Blade Replacement; Transporting Machine - Nobles SPEED SCRUB 15 Manuel Opérateur

ENGLISH

SQUEEGEE BLADE REPLACEMENT

Tilt the machine back to access the squeegee blades.
FOR SAFETY: Before tilting machine, turn the main
power switch to the off position and empty tanks.
To remove the squeegee blades, lift the blade retainer
clip and pull the blade from the channel (Figure 39).
FIG. 39
For easy blade installation, the squeegee blades are
color coded to match the scrub head blade channel
(Figure 40).
Gray -- Outside Blade
Black -- Inside Blade
FIG. 40
To install blade, slide each blade into the appropriate
channel until retainer clip engages blade (Figure 41).
The squeegee blade ribs should face away from each
other.
FIG. 41
14
Retainer Clip
Gray
Black
Home Find... Go To..

TRANSPORTING MACHINE

Before transporting machine, empty water from tanks
and turn the main power switch to the off position.
FOR SAFETY: When transporting machine, get
assistance or use a mechanical lift when lifting
machine.
FOR SAFETY: When transporting machine, use
tie- -down straps to secure machine.
To wheel machine from room to room, raise the scrub
head to the transport position and push the machine
forward (Figure 42).
DO NOT tilt machine on the rear wheels. Only use rear
wheels to transport machine up and down a curb.
FIG. 42
Curb
FOR SAFETY: When transporting machine, do not
tilt on rear wheels and do not wheel up or down
stairs. Get assistance or use a mechanical lift when
lifting machine.
Nobles Speed Scrub 15 Battery (03- -11)