Parkside PFT 20 A1 Traduction Des Instructions Originales page 7

Graphical symbols
Not suitable for sucking up liquids.
For sucking up dry dirt from the
house, garage and workshop.
Attaching the filter bag
1. Bend the side flaps (3) on the paper
filter bag (1) onto the perforation.
2. Unfold the paper filter bag (1) com-
pletely and invert it over the internal
suction fitting of the suction connection
(4).
The sealing ring (5) on the filter bag
opening must fully surround the con-
nector on the suction fitting.
3. The diameter of the sealing ring (5)
(40-70 mm) has to be adjusted using
the perforated rings (5a) depending on
the suction intake opening.
Cleaning/maintenance
Remove the mains plug.
Danger of electric shock.
General cleaning work
When full, replace the paper filter bag (
(for reordering, see 'Accessories').
Disposal/environmental
protection
The appliance, accessories and packaging
should be properly recycled.
Accessories
Spare parts and accessories can be
www.grizzlytools-service.eu
If you have issues ordering, please use the
contact form. If you have any other ques-
tions, contact the "Service-Center".
Service-Center
Service Great Britain
GB
Tel.: 0800 404 7657
E-Mail: grizzly@lidl.co.uk
IAN 353254_2007
Service Ireland
IE
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: grizzly@lidl.ie
IAN 353254_2007
Importer
Please note that the following address is
not a service address. Please initially con-
tact the service centre specified above.
1) Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
DE-63762 Großostheim
GERMANY
www.grizzlytools-service.eu
GB
obtained at
IE
7