Invacare Matrx Elite PBE Manuel D'utilisation page 5

3 Setup
3.1 Hardware Kit Contents
 If any of the hardware is missing or misplaced, please contact our customer service department
and arrangements will be made to send you the necessary replacements.
Motion Concept - Canada: 866-748-7943 USA: 888-433-6818
Invacare - Canada: 800-668-5324 USA: 800-333-6900
QTY
2 Back Mounting Plates
2 Cane Clamps
2 Cane Inserts (3/4" (19 mm))
2 Cane Inserts (7/8" (22 mm))
6 Depth/Recline Adjustment Screws
6 Cane Clamp Screws
2 Set Screws
2 Cane Clamp Nut Plates
4 Spacers* (not shown)
4 Long Mounting Pins (optional)
1 Elite Headrest Adapter Plate**
4 Truss Screws**
4 Locknuts**
* Parts shipped with 12 inch (31cm) Elite backs only. One
spacer ships installed between the back mounting plates
and cane clamps. Two more are provided with the back.
** Parts shipped with medium, large and heavy duty Elite
backs only.
3.2 Tools Required
*Wrenches: 7/8" (22 mm)
*Allen Keys: 2mm, 4mm, 5mm
Utility Knife/Scissors
Tape Measure/Ruler
* Tools provided in kit
Part No 1171724
DESCRIPTION
Back
Mounting
Plate
Cane
Clamp
Nut
Plate
Depth/Recline
Adjustment
Screws
5
Cane Insert
Cane Clamp
Set Screw
Invacare® Matrx® Elite
Cane
Clamp
Screws