Belt Adjustment - Powerpeak Comfort Line Ftm8301P Mode D'emploi

Press PROGRAM until it shows the user programs (U1 to U3). Set the running time and press START. You
can only make use of your own user program when all required data for each section are set.
FAT (body fat program)
Press PROGRAM continuously to enter the body fat program. Press MODE and insert the data.
F1 = SEX
F2 = AGE
F3 = HEIGHT
F4 = WEIGHT
F5 = FAT
Use SPEED+ and SPEED to insert F1 to F4 and press MODE. To insert F5, hold the hand pulse sensors.
The display will show your body mass index after 3 seconds. The body mass index is to test the relation
between height and weight. A healthy BMI value should be between 20 25. If under 19, it means
underweight, if between 25 29 it means overweight.
F1 SEX
F2 AGE
F3 HEIGHT
F4 WEIGHT
F5 FAT
FAT
FAT
FAT

BELT ADJUSTMENT

You may need to adjust the running belt during the first few weeks of use. All running belts are properly
set at the factory. It may stretch or be off centre after use. Stretching is normal during the break in
period.
Adjusting the belt tension
If the running belt feels as though it is slipping or hesitating when you place your foot on it during a run,
the tension on the running belt may have to be increased. To increase the running belt tension:
1. Start the treadmill without anyone on the running belt, press SPEED+ button until speed reaches 5,6
km/h.
2. Place a wrench on the left adjustment screw. Turn the wrench clockwise 1/4 turn to draw the rear
roller and increase the belt tension.
3. Repeat step 2 for the right adjustment screw. You must be sure to turn both bolts the same number
of turns, so the rear roller will remain square relative to the frame.
4. Repeat step 2 and step 3 until the slipping is eliminated.
Note: be careful not to tighten the running belt tension too much as you can create excessive
pressure on the front and rear roller bearings. An excessively tightened running belt may damage
the roller bearings resulting in bearing noise from the front and rear rollers.
01 = male, 02 = female
10 99
100 200
20 – 150
19 = underweight
20 – 25 = normal weight
25 – 29 = overweight
30 = obese
31