PowerPeak Comfort line FTM8301P Mode D'emploi page 29

MODE: this button is to switch between the different options: 0:00 (manual operation), 15:00 (time
countdown), 1,0 (distance countdown) or 50 (calories countdown). Use the SPEED or INCLINE buttons to
modify the settings. Then press START to start the treadmill.
START: when the device is switched on and the safety key is attached, press this button to start the
treadmill.
STOP: if you push this button while running, the treadmill will slowly stop. The speed will decline until
the treadmill has come to complete stand still.
SPEED+ / SPEED : with these buttons you can increase or decrease the speed. The speed will change 0.1
km/h each time you push the button. If you hold the button for more than 0.5 seconds continuously, the
speed will change quickly.
INCLINE+ / INCLINE : with these buttons you can increase or decrease the incline. The incline will change
1% each time you push the button. If you hold the button for more than 0.5 seconds continuously, the
incline will change quickly.
SPEED+ and INCLINE+: if you push these buttons at the same time for more than 3 seconds, you'll hear a
sound signal. This means that you have changed miles into kilometres, or reverse.
Quick start (manual mode)
1. Switch on the device and attach the safety key.
2. Press START. You will hear a sound signal and the display TIME will count from 3 to 0 seconds. After
these 3 seconds, the treadmill will start with a speed of 1,0 km/h.
3. Press SPEED+ or SPEED to adjust the speed.
4. Press INCLINE+ or INCLINE to adjust the incline.
5. Press STOP to stop the treadmill.
Manual mode
If you do not make any settings and press the START button directly, the treadmill will start with a speed
of 1,0 km/h. The other displays will start to count from 0. Press SPEED+ or SPEED and INCLINE+ and
INCLINE to adjust the speed and incline.
x To set the time, press the MODE button directly. The display TIME will show 15:00 and blink. Use
SPEED+/SPEED or INCLINE+/INCLINE to set the desired time (5:00 – 99:00). If you do not want to
make a setting, press the MODE button directly to continue.
x From the time setting mode, you press MODE. The display DISTANCE will show 1,0 and blink. Use
SPEED+/SPEED or INCLINE+/INCLINE to set the desired distance (0,5 – 99,9). If you do not want to
make a setting, press the MODE button directly to continue.
x From the distance setting mode, you press MODE. The display CALORIES will show 50 and blink. Use
SPEED+/SPEED or INCLINE+/INCLINE to set the desired amount of calories (10 – 999). If you do not
want to make a setting, press the MODE button directly to continue.
After you have finished your settings, press START. The treadmill will start after 3 seconds. Press
INCLINE+ or INCLINE and SPEED+ or SPEED to adjust the incline and speed. Press STOP to stop the
treadmill.
Pre set programs P1 to P12
Press PROGRAM. The display will show the programs P1 to P12. Choose the desired program. Then the
TIME display will blink. The standard time setting is 10:00, with SPEED+/SPEED or INCLINE+/INCLINE
29