Specifications - Scotsman Meridian HID312 Manuel D'installation Et De L'utilisateur

HID312 and HID525 50 Hz
Installation and User's Manual

Specifications

The ice maker-dispenser is designed to be installed
indoors, in a controlled environment. Although
it can operate in a wide range of air and water
temperatures, it will provide the best performance if
not subject to extremes.
Air Temperature Limitations
• Maximum: 38 C.
o
• Minimum: 10 C.
o
Water Temperature Limitations
• Maximum: 38 C.
o
• Minimum: 4.4 C.
o
Water Pressure, potable
• Maximum: 5.5 Bar (550,000 pascal)
• Minimum: 1.3 Bar (130,000 pascal)
Water Conductivity:
• Minimum: 10 microSiemens/cm
RO water may be supplied to the potable water
system, but if it has less than the above conductivity,
the water level sensor will not detect water and the
unit will not make ice.
Deionized water will not work and isn't recommended.
Voltage
• Maximum: 253 Minimum: 207
Operating the machine outside of any of the above
limitations is considered abuse and any resulting
damage is not covered by warranty and could cause a
complete loss of warranty coverage.
Warranty Information
The warranty statement for this product is provided
separately from this manual. Refer to it for applicable
coverage. In general warranty covers defects
in material or workmanship. It does not cover
maintenance, corrections to installations, or situations
when the machine is operated in circumstances that
exceed the limitations printed above.
Model Electrical
HID312A-6A 230/50/1
HID525A-6A 230/50/1
Condenser Typical Amp Draw
Air 2.9
Air 4.0
July 2015
Page 2
Product Information
The product is an ice maker-dispenser. It is designed
to be installed on a countertop or on a specific
machine stand.
• All models require a drain. An internal drain basin
separates the ice storage bin's drain from the drip tray
drain.
• Has a 274 cm power cord HO5VV -F3G1,5 Euro
Harmonized without plug.
• Air cooled models flow air left to right and include
a cleanable air filter.
• The Legs are optional. Thread size 3/8 - 16.
• Ice or water vending is triggered by touch free
sensors, no other activation method is available.
• For available options and kits, see sales literature.
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety and
performance. They meet or exceed the standards of
safety agencies.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the use
of any part and/or other components not specifically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specifications and
design are subject to change without notice.
The GWP (Global Warming potential) of gas HFC
R134a is 1300, of gas HFC R404A is 3750.
Maximum Fuse Size
15
15