Non-Verified Scales; Technical Data; General Technical Data - Seca 645 Mode D'emploi

checksum
10.2

Non-verified scales

11

TECHNICAL DATA

11.1

General technical data

Parameter
Dimensions, total
• Depth
• Width
• Height
Dimensions, weighing platform
• Depth
• Width
• Height
Weight
Height of digits, display
Ambient conditions, operation
• Temperature
• Air pressure
• Humidity
Ambient conditions, storage/transport
• Temperature
• Air pressure
• Humidity
Medical device in accordance with regulation (EU)
2017/745
1. Ensure that the device is switched off.
2. Press and hold any key and start the scale.
ð The current content of the verification counter flashes in the display for a few
seconds.
3. Compare the content of the verification counter output with the number given on the
2
verification counter seal.
Both numbers have to match for the verification to be valid. If the verification sticker and
the verification counter do not match, the scale must be verified. Please contact your
service partner or seca Service. Once the scale has been verified, a new, updated verifi-
cation counter sticker is used to identify the verification counter reading. The person au-
thorized to perform verification secures this verification with an additional seal. The verifi-
cation counter sticker can be ordered from seca Service.
The product needs to be set up carefully and serviced regularly. Depending on how fre-
quently the product is used, seca recommends servicing at intervals of 3 to 5 years.
CAUTION!
Faulty measurements as a result of poor servicing
► Have servicing and repairs carried out exclusively by seca Service or an au-
thorized service partner.
► You can find your local service partner at www.seca.com.
Value
approx. 25 kg
+10 °C to +40 °C / +50 °F to 104 °F
700 – 1060 hPa
30 % – 80 % no condensation
-10 °C to +65 °C / +14 °F to 149 °F
700 – 1060 hPa
0 % – 95 % no condensation
Class I with measuring function
Technical data • 65
English
740 mm
740 mm
1154 mm
600 mm
600 mm
57 mm
25 mm