Ce Declaration Of Conformity - Jay Electronique Jump Notice D'installation

24 - CE declaration of conformity

Translatd from French
The manufacturer
Declares that for the repeater set described in its instructions, the declaration of conformity applies to the following devices:
is in conformity with the requirements of the following directives and conformity was checked in accordance with the following standards:
To this end, the notified body No. 0123:
Has issued an EC-Type examination n° M6A 035304 0007 Rev00 reflecting compliance with the following standards:
Directive
DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND
OF THE COUNCIL
of 17 May 2006 on machinery, and amending Directive 95/16/EC
This equipment can be used in applications up to Category 4 (PL e) according to EN ISO 13849-1 :2015 and SIL 3 according to EN 62061 :2005 +
Cor. :2010 + A1 :2013 + A2: 2015 and EN 61508-1-7 :2010, provided that the Transmitter / Receiver set working with this product is certified PL e / SIL 3.
is in conformity with the requirements of the following directives and conformity was checked in accordance with the following standards:
Directive
DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND
OF THE COUNCIL
of 26 February 2014 on the harmonisation of the laws of the Member States
relating to the making available on the market of electrical equipment
designed for use within certain voltage limits
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND
OF THE COUNCIL
of 26 February 2014 on the harmonisation of the laws of the Member States
relating to electromagnetic compatibility (recast)
DIRECTIVE 2014/53/EU OF THE EUROPEAN PARLIAMENT AND
OF THE COUNCIL
of 16 April 2014 on the harmonisation of the laws of the Member States
relating to the making available on the market of radio equipment and
repealing Directive 1999/5/EC
With the requirements of the European Directive of the Council of Europe dated June 8, 2011, relative to the limitation of use of certain dangerous

substances in electrical and electronic equipment (RoHS), (2011/65/EU).
With the requirements of the European Directive of the Council of Europe dated July 4, 2012, relative to electrical and electronic equipment waste

(WEEE), (2012/19/EU).
It is important that the component is subject to correct installation, maintenance and use conforming to its intended purpose, to the applicable regulations and
standards, to the supplier's instructions, user manual and to the accepted rules of the art.
Name, function and address of the person authorised to compile the technical file:
Pascal De Boissieu, Technical Manager - JAY électronique ZAC la Bâtie, rue Champrond 38334 St Ismier-France
Issued at: Saint Ismier, FRANCE, 2021/02/24.
Signature:
333050F
- 76 -
DECLARATION OF CONFORMITY
JAY Electronique
ZAC la Bâtie, rue Champrond
38334 ST ISMIER Cedex
FRANCE
TÜV SÜD Rail GmbH
Barthstr. 16
D-80339 München
Germany
signed on original
JUMP
JUTxxxxx
Harmonised Standard
EN ISO 13849-1 :2015 Requirements for performance level PL e (Category 4)
EN 61508-1-7 :2010 Requirements for SIL 3
EN 62061 :2005 + Cor. :2010 + A1 :2013 + A2 : 2015 Requirements for SIL 3
UL 1998: 2013
EN 60204-32 :2008
IEC 60204-1:2016
NFPA 79: 2018
Harmonised Standard
IEC 62368-1 :2014/A11 :2017
EN 60204-32 :2008
IEC 60204-1:2016
EN 62479:2010
EN 301 489,3 V2,1,1
EN 301 489-1 V2,2,3
EN 61000-6-2:2005
EN 61000-6-2:2016
EN 61000-6-7:2015
EN 62061 : 2005/A1: 2013/ A2:2015
EN 61326-3-1:2017
EN 61326-1:2013
EN 300 220-2 V3.1.1
frequency Band 433.05-434.79 MHzz
•
333050F-Serie_Jump-Declarations_UE_de_conformite-FR_EN.docx
Jump - 332970E_A005
04/03/21