Installation; Mechanical Mounting Of Jump Repeater; Physical Position Of Jump Repeater - Jay Electronique Jump Notice D'installation

7 - Installation

7.1- Mechanical mounting of Jump repeater

Jump
4 x Ø5.5 mm

7.2- Physical position of Jump repeater

The Jump radio repeater must be placed in a location which is sheltered from impacts
and weather.
RF waves do not cross metal walls. The antenna must not be placed in an enclosure
forming a shield (metal cabinet, reinforced concrete wall, metal framework or wall, etc.).
Any obstacle located between the components of the system (transmitter / receiver /
receiver) will produce a loss of range.
Insofar as possible, the repeater antenna should :
„ be placed in the most appropriate location to be best seen by the transmission and
reception points,
„ be directed downward, upward, or horizontally, referring to the fact that the best radio
lobe is indicated on the diagrams given above.
„ be pointed directly or, if not possible, with a minimum number of obstacles between the
transmission and reception points.
„ It should never cross a wall, even an insulating wall.
Jump - 332970E_A005
04/03/21
178 mm
60 mm
OK OK Wrong OK
metal
cabinet
Wrong
metal
cabinet
EN FR
- 65 -