4 - Configuration
4.1 Delivery configuration
The Jump radio repeater is configured on delivery with the following
settings :
Choice of transmitting channel relative
4.2 Configuration of Jump radio repeater
The repeater has 2 thumbwheels and a 8-cursor DIPswitch by which the
system is configured :
(«Battery» version shown)
1) Thumbwheels : for radio channel configuration
2) DIPswitch : for radio transmit power configuration, identity code configuration
and operating mode configuration.
3) Red indicator light (LD5) : for «radio channel configuration error» indication.
Jump - 332970E_A005
04/03/21
Radio channel
Radio transmit power level
to the receiving channel
number of frames repeated
Identity code
Jump
CHARGE
ERROR
LD1
CONFIG
ERROR
64 (thumbwheel A : 6, thumbwheel B : 4)
4 (DIPswitch OFF-OFF-OFF)
Radio transmission channel = Channel
radio reception
6 (DIPswitch OFF-OFF)
no pre-programmed
TENS
UNITS
B
A
CONFIGURATION
LD5
1
LD4
LD3
LD2
2
3
EN
FR
- 49 -