PRO-POINT 8569741 Manuel De L'utilisateur page 9

8569741 Air Die Grinder
AIR TOOL PRECAUTIONS
1.
Extended exposure to air tool noise may cause
hearing loss. Ear protection gear can reduce or
eliminate the noise level.
Vl.O
2. Inspect the tool's air line for cracks, fraying or other
faults before each use. Discontinue use if the air line
is damaged or hissing is heard from the air line or
connectors, while operating the tool. Replace the
defective component/air line.
3. Do not allow people, mobile equipment or vehicles
to pass over the unprotected air line. Position the
air line away from high traffic areas, in a reinforced
conduit or place planks on both sides of the airline
to create a protective trench.
4. Prevent damage to the air line by observing
the following:
a. Never carry the tool by the air line.
b. Keep the air line behind the tool and out of
the tool's work path.
c. Keep the air line away from heat. oil, sharp
edges or moving parts.
d. Do not wrap the air line around the tool as
sharp edges may pierce or crack the airline.
Coil the air line when storing.
5. A damaged or disconnected air line under pressure
may whip around and inflict personal injury or
damage the work area. Secure the compressor's air
line to a fixed or permanent structure with clamps
or cable ties.
6. Install an in-line shutoff valve or regulator to allow
immediate control over the air supply in an
emergency, even if a hose is ruptured.
8 For technical questions call 1-800-665-8685