PRO-POINT 8569741 Manuel De L'utilisateur page 21

8569741 Air Die Grinder
Vl.O
Problem(s) Possible cause(s) Suggested
solution(s)
Loss of power
Excessive drain on Check the air
or erratic the air line.
supply. Ensure
performance.
Moisture or tool is
restriction in the connected to a
air hose. Incorrect 3/8 in. I.D.or
size or type of larger air hose
hose connectors. with no kinks or
restrictions and
that the fittings
are connected
properly.
Air compressor Ensure tool is
has connected to a
insufficient flow. compressor
whose rated
flow matches
the tool.
Tool runs at Motor parts worn. Have a qualified
normal speed technician
but loses replace
power worn parts.
under load.
Lack of air tool oil. Pour air tool oil
into air inlet per
instructions.
20
For technical questions call 1-800-665-8685