PRO-POINT 8569741 Manuel De L'utilisateur page 7

8569741 Air Die Grinder
Vl.O
6. Never point the cutter towards yourself. If it should
slip, part of your body could come in contact with
moving parts.
7. Never force the tool. Excessive pressure could bend
or break the mandrel, resulting in damage to the
tool, your work piece or serious personal injury. If
your tool runs smoothly under no load, but does
not run smoothly under load, then excessive
pressure is being used.
8. This tool will not stop moving immediately. Do not
lay the tool down or leave it unattended until it has
come to a complete stop. A part that is moving
could make the tool jump or grab a surface and pull
the tool out of your control.
9. Hold the tool by the insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
10. Use an appropriate dust respirator when working
for an extended period of time. This will help
prevent breathing in the fine dust created
while working.
WARNING! Dust that is created by power sanding,
sawing, grinding, drilling, and other construction
activities may contain chemicals that are known to
cause cancer, birth defects, or other genetic
abnormalities. The level of risk from exposure to these
chemicals varies, according to how often this type of
work is performed. In order to reduce exposure to these
chemicals, work in a well-ventilated area, and use
approved safety equipment, such as a dust mask that is
specifically designed to filter out microscopic particles.
6
For technical questions call 1-800-665-8685