PRO-POINT 8569741 Manuel De L'utilisateur page 20

Vl.O
Air Die Grinder
8569741
Problem(s)
Possible
Suggested
cause(s) solution(s)
Tool runs
Motor parts
1. Check air inlet
slowly. Air jammed with
filter
flows slightly dirt particles. for blockage.
from exhaust.
2. Pour air tool oil
into air inlet as
per instructions.
3. Operate tool in
short bursts quickly
reversing rotation
back and forth
where applicable.
4. Disconnect
supply. Free motor
by rotating drive
shank manually
where applicable.
5. Repeat above as
needed. If this fails,
bring to
service center.
Visit www.princessauto.com for more information
19