PRO-POINT 8569741 Manuel De L'utilisateur page 8

Vl.O
Air Die Grinder
8569741
11. Always make sure the work surface is free from
nails and other foreign objects. Cutting into a nail
can cause the bit and tool to jump and damage
the bit.
12. After changing the bits and accessories or making
adjustments, make sure the collet nut and any other
adjustment devices are securely tightened. Loose
adjustment devices will be violently thrown.
13. Remove any adjusting keys or wrenches before
turning the tool on.
14. Always use the correct collet size. If the collet size
is larger than the accessory shank size it will not
grip the shank properly, leading to possible injury to
the operator, damage to the tool or work piece.
15. Always check accessory bits, grinding stones, cut-
off wheels etc. for damage before each use.
Damaged accessories can break during use and
cause serious injury.
16. Never use dull or damaged bits. Sharp bits must be
handled with care. Damaged bits can snap during
use. Dull bits require more force to push the tool,
possibly causing the bit to break.
17. Never touch the bit during or immediately after use.
After use, the bit will be too hot to be touched by
bare hands.
18. If devices are used for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of a dust
collection system reduces dust-related hazards.
Visit www.princessauto.com for more information
7