Lubrication - Pro-Point 8569741 Manuel De L'utilisateur

8569741 Air Die Grinder Vl.O
LUBRICATION
Only use air tool oil to lubricate the tool. Other lubricants
may not be suitable and could damage the tool or cause a
malfunction during use.
1.
It is very important that the tool be properly
lubricated. Without proper lubrication, the tool will
not work properly and parts will wear prematurely.
Manually dropping a drop or two of air tool oil once
a day into the tool's male connector is better than
using an automatic in-line lubricator, which should
only be required when there are multiple users of
the same tool.
2. Keep the air line lubricator filled and correctly
adjusted. The in-line lubricator should be regularly
checked and filled with air tool oil. Proper
adjustment of the in-line lubricator is performed by
placing a sheet of paper next to the exhaust ports
and holding the throttle open approximately 30
seconds. The lubricator is properly set when a light
stain of oil collects on the paper. Excessive amounts
of oil should be avoided.
3. Air tool oil is the only recommended lubricant for
use in all air tools. Do not try to use other types of
lubricants to oil your tools. Using the wrong
lubricant will cause premature tool failure and
I
or
loss of power. Use only recommended lubricants,
specially made for pneumatic applications.
Substitutes may harm the rubber compounds in the
tool's 0-rings and other rubber parts.
16 For technical questions call 1-800-665-8685