Riester Metpak Mode D'emploi page 13

G U A R A N T E E
This device was manufactured in accordance with the
most stringent quality requirements. Before leaving the
factory, it underwent extensive final testing.
We are thus in the fortunate position to be able to offer
you a guarantee extending for
2 years starting on the date of purchase
This guarantee covers any defects of the manometer
which are demonstrably due to material or manufacturing
faults. Your warranty will become null and void under the
following circumstances: incorrect handling, non-compli-
ance with Operating Instructions, use of other manufactu-
rers' spares and accessories, unauthorised amendments
or repairs and normal wear and tear.
All defective parts of the manometer will be repaired or
replaced free of charge within the guarantee period. The
guarantee excludes defects on the cuff!
Claims made under the guarantee shall be valid only if
the instrument is accompanied by this Guarantee Card,
completely filled in and stamped by the dealer. Please
note that guarantee claims must be submitted within the
guarantee period.
We will, of course, gladly perform testing or repair work
after the guarantee period as well. Upon request, we will
provide non-binding cost estimates for such work.
Should your instrument exhibit a defect during the gua-
rantee period or require repair, please send the entire
instrument, along with the filled-in Guarantee Card, to
the following address:
Rudolf Riester GmbH & Co. KG
Reparaturen Abt. RR
Bruckstr. 31
D-72417 Jungingen
Germany
For repairs of Ri-Former and rechargeable handles for
mains sockets please state serial number of equipment
(on Ri-Former below the unit, for mains socket handles
between the plugs).
Serial number:
(See manometer scale and packaging)
Date
Stamp and Signature of the specialized dealer
Please detach this card on the perforated line!