Options; Programs - DeguDent Multivac compact Mode D'emploi

3.2 Options

In this area the individual presettings can be changed.
Go to the "programming" mode (see section 3.1).
Select the "options" area.
Press adjusting button.
Turn the adjusting wheel until the desired setting is shown in the display.
You can select the following settings:
Language
acoustic signal
acoustic signal
presetting vacuum
presetting speed
presetting stirring time
presetting direction of rotation
Press the adjusting wheel to change a setting.
Turn the adjusting wheel until the desired setting is shown in the display.
.
Press the adjusting wheel to accept the change.
By pressing the cancellation key
enter into the next (higher) control level.

3.3 Programs

In this area individual stirring programs can be changed or created.
Go to the "programming" operation mode (see section 3.1).
Select the "programs" area.
Press adjusting button.
Turn the adjusting wheel until the desired program number is shown in the display.
Press the adjusting wheel to change the selected program.
(German, English, Spanish, Italian, French)
keys (on, off)
turn (on, off)
for manual operation
for manual operation
for manual operation
for manual operation
a process can be terminated at any time and you will
25