Preparing For Use; Baby Unit - Philips SCD570 Manuel D'installation

• II Parent unit
1 On/off button
2 TALK button
3 - button
4 Microphone
5 'link' light
6 Display
7 Sound level lights
8 MENU button
9 + button
10 Battery status light
11 OK button
12 Handgrip/attachment hole for neck strap
13 Compartment for rechargeable batteries
14 Lid of compartment for rechargeable
batteries
15 Socket for small plug of adapter
16 Neck strap
17 Rechargeable batteries
18 Small plug of adapter
19 Adapter
• III Baby unit
1 Nightlight and nightlight on/off button
2 Power-on light
3 FIND button
4 Microphone
5 Next lullaby button
6 Lullaby play/stop button
7 On/off button
8 Volume + button
9 Battery status light
10 Volume - button
11 Temperature sensor
12 Loudspeaker
13 Socket for small plug of adapter
14 Compartment for non-rechargeable
batteries
15 Lid of compartment for non-rechargeable
batteries
16 Small plug of adapter
17 Adapter
4

3 Preparing for use

IMPORTANT: Read the safety instructions
carefully before you use the baby monitor
and keep them for future reference.

3.1 Baby unit

Use the baby unit on electric power. To guarantee
automatic power backup in case of a power
failure, we advise you to insert non-rechargeable
batteries.
3.1.1 Operation on electric power
Put the adapter in an electric outlet and insert
1
the small appliance plug into the baby unit.
3.1.2 Placing the non-rechargeable batteries
If there is a power failure, the baby unit can
run on four 1.5V R6 AA alkaline batteries (not
included).
Do not use rechargeable batteries. The baby
unit does not have a charging function and
rechargeable batteries discharge slowly when they
are not in use.
Warning:
B
Unplug the baby unit and make sure your hands
and the unit are dry when you insert non-
rechargeable batteries.
Note:
D
We advise you to use the baby unit on electric
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries. The operating time on non-rechargeable
batteries is 24 hours.