Getting Started; Resetting The Unit; Setting The Clock And The Calendar - Sony MEX-5DI Mode D'emploi

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button with a pointed object, such
as a ballpoint pen.
After the reset is complete, the pre-stored images
are displayed. Press (IMAGE) on the card remote
commander to show the clock display and set the
clock and calendar.
Reset button
Notes
• Pressing the reset button will erase the clock/
calendar setting and some stored contents.
• The unit starts to perform initial setting for 10
seconds after you press the reset button. During
this, do not insert a disc or "Memory Stick,"
otherwise the unit may not be reset. Should this
occur, press the reset button again.
• The unit makes some noise during the initial
settings, this is not a malfunction.
18
Setting the clock and the
calendar
The clock uses a 24-hour digital indication (Day/
Month/Year Time).
The factory setting is "01/01/2002 01:00."
1
Press (MENU).
2
Press < or , repeatedly to select
"Setup."
3
Press (ENTER).
4
Press M or m repeatedly to select
"Clock."
5
Press (ENTER).
1 Press M or m repeatedly to set the
day.
Each time you press M, the number of the
day increases.
Each time you press m, the number of the
day decreases.
2 Press , to move to the month,
then press M or m repeatedly to set
the month.
3 Repeat step 2 to set the year, the
hour, and the minute.
6
Press (ENTER).
The settings for clock and calendar are stored,
and the display returns to the normal display.
Note
If your car has no ACC position, turn on the power of
this unit first, then set the clock and the calendar.
Tip
You can set the year from 2000 to 2099.