Sony MEX-5DI Mode D'emploi page 32

7
Press M or m repeatedly to select a
location or type of image that you want
to set.
Save: stores all images in the first layer of a
"Memory Stick" as wall papers. In this case,
you cannot adjust images or select the display
type. If your stored images are sized 400 × 96
dots, you can store several images at once
using this function.
If you press (GRAPHIC) while storing
images, storing will be cancelled.
PictureSelect: If an image you want to set
is in the first layer of a "Memory Stick,"
select this.
Cyber-shot: If you want to set a picture
taken by an optional Sony digital still camera
Cyber-shot, select this.
(Folder name): When a folder is in a
"Memory Stick," the folder name is
displayed.
8
Press (ENTER).
Select the folder name in step 7. If there are
images in folders of a lower layer, repeat step
7 and 8 to select the folder which contains
your desired image.
An image can be set in up to the 5th layer
folder in a "Memory Stick."
9
Press < or , repeatedly to select the
image you want to set.
10
Press (ENTER).
If the size of the image you have selected in
step 9 is 400 × 96 dots or less, you cannot
adjust the image. In this case, skip to step 12.
If you select "FlashMemory" in step 5, skip to
step 12 as well.
32
11
Adjust the image.
1 Press < or , repeatedly to rotate
an image.
Press < to rotate anticlockwise and press
, to rotate clockwise.
2 Press (ENTER).
3 Press M or m repeatedly to decide
the size of image you want to
display.
Press M to enlarge the selected field of
image or press m to reduce it.
If you want to display the whole image,
press M repeatedly to make the selected
field of image as large as possible.
4 Press (ENTER).
If you select the whole image in step
11-3, skip to step 12.
5 Press the cursor button (M/m/</,)
repeatedly to select the image part
you want to display.
6 Press (ENTER).
If you cut and display your selected field
of image, you cannot select the display
type in step 14. Skip to step 16.
12
Press M or m to select "Setup."
13
Press (ENTER).