Specifications; Camera Specification - e2v Argus 4 Manuel D'utilisation

5.

SPECIFICATIONS

5.1

Camera Specification

•
Compliance Data
RFI/EMC
Safety
Vibration/Shock
Restriction of the use of Hazardous
Substances in electrical and electronic
equipment (RoHS)
•
Environmental Data
Thermal conditions -
Sealing -
Impact -
Vibration -
Storage -
© e2v technologies (uk) limited
Conducted Emissions -
Radiated Emissions -
Electrostatic Discharge -
The camera has been designed to operate for:
• 45 minutes at 80 °C (176 °F)
• 15 minutes at 150 °C (302 °F)
• 7 minutes at 260 °C (500 °F)
• 5 minutes at 260 °C (500 °F) (Argus
• Minimum operating temperature is –10 °C (14 °F)
The camera is sealed to allow short-term immersion in
water (IP67)
The camera has been designed to withstand a drop from a
height of 2 metres (78 inches)
The camera has been design to withstand transportation
vibration defined by BS EN 60721-3-2 Class 2M3
The camera can be stored for extended periods. It is
recommended that for maximum effective operational life,
the storage temperature is kept between –10 °C and
+40 °C (14 °F and 104 °F) and the camera is retained in its
carry case when not in use.
BS EN 61000-6-3:2001 Class B
FCC CFR-47 Part 15
BS EN 61000-6-3:2001 Class B
FCC CFR-47 Part 15
BS EN 61000-6-1:2001 Class B
IEC 60950-1 and related national
standards
BS EN 60721-3-2 Class 2M3.
All parts of the system are
compliant with EU directive
2002/95/EC
104077 DAS709758AA (UK) version 7, page 18
TM
4 HR320)