Remote Control Functions - e2v Argus 4 Manuel D'utilisation

2.

REMOTE CONTROL FUNCTIONS

Some of the Argus
without the need to connect the camera to a laptop/PC. To access the remote
control functions, press the RED button on the remote. The screen will show the
first option in a list of six. These are:
Time and Date Setting
Dynamic Scene Colourisation Selection
Text Colour
Stored Image: Review and Deletion
LCD Brightness Adjustment
Temperature Units
Language (Argus
To access any of these functions, press the menu ▲ or menu
▼ buttons until the desired option is displayed. Once the
desired option has been selected, each option has further
actions (see below). Pressing the RED button again will set
any changes required and exit the option list or pressing the
menu ▲ or menu ▼ buttons another option can be selected.
The menu will disappear from the image after 8 seconds.
•
Time and Date Setting
Press the OK button to enter the time and date settings. Using the menu ▲ or
menu ▼ buttons, scroll through the hours, minutes, days, months and years.
Adjust each setting as required by using the + or - buttons. Once the desired
setting has been achieved, scroll to "save time and date" and press OK.
•
Dynamic Scene Colourisation Selection
By pressing the + or - buttons, the colour options can be scrolled through.
These are:
Grey Scale (White Hot)
Grey Scale (Black Hot)
Heat-Finder Red (White Hot)
Heat-Finder Red (Black Hot)
Heat-Finder Soft Red (White Hot)
Heat-Finder Soft Red (Black Hot)
Heat-Marker Red
Heat-Marker Soft Red
Half Colour
Full Colour 1
Full Colour 2
Full Colour 3
Green Scale
•
Text Colour
By pressing the + or - buttons, the colour of the text, black or white, can be
selected.
© e2v technologies (uk) limited
TM
4 features can be adjusted and set up via the remote control
TM
4 HR320)
104077 DAS709758AA (UK) version 7, page 12