EMAK OM 98L/14,5H Manuel D'utilisation page 67

1
2b
4
3
3
5
4a
4
2
5a
WARNING!
works correctly and keep the chute se­
curely lowered. Make sure that the pin is
fitted properly to prevent it from falling out
accidentally.
3.6 REPOSITIONING THE ANTI-CHIPPING
WHEELS
For transport reasons, the anti-chipping wheels
(1) are fastened on the top hole.
1
2
3
4
1
3
2
5a
Check that the spring
1
In order for them to work properly, the anti-chip-
ping wheels (1) must be repositioned in the hole
which is most suited for the type of ground
( 5.4.5).
3.7 MOUNTING THE FRONT BUMPER
2
(if provided)
Mount the front bumper (1) on the bottom of the
frame (2) using the four screws (3).
3
5a
1
2
3
EN 9