Removing The Sling - arjo MAA6000 Mode D'emploi

and the patient lays fully supported and
comfortably in the Repositioning Sling
• make sure the Repositioning Sling is not
attached to any other object than the spreader
• make sure that there is clearance to perform the
If an adjustment/shifting of balance is needed:
Lower the patient until he/she is supported by
1.
2.
(See Fig. 18 )

Removing the Sling

Follow these 6 steps
Apply bed brakes and adjust the height of the bed
WARNING
To avoid the patient from falling, make sure
that the sling attachments are securely
attached before and during the lifting
process.
roll is not possible, use an Arjo sliding sheet/tube to
Fig. 18 Fig. 19
11
Before detaching the loops make sure that
:
(See Fig. 19 )
• the patient's body weight is fully supported by
the bed
•
WARNING
To avoid injury, make sure all loops are
detached from the hooks before removing
the lift.
Detach all loops and move the lift away from the
(See Fig. 20 )
Log roll the patient to the other side and remove
Make sure the patient is in a comfortable and
Fig. 20
EN