Manual Operation; Installation - Key Automation TURBO 250 Manuel D'emploi

Masquer les pouces Voir aussi pour TURBO 250:

Table des Matières

Les langues disponibles

1. Insert the key in position 1 lock and rotate 90° counter-clockwise (fig. 3)

2. Insert the unlock key in position 2 and rotate clockwise until complete unlock of the pinion (fig. 3).

Before starting installation, you should carry out the following checks, as well as making sure the

structure is compliant with current standards. Specifically:

•

Check that the wall and/or column are in good condition. If they are not, the fastening points

will need to be reinforced.

•

Make sure that the travel of the shutter is not obstructed in any way. The shutter must not

have friction, the movement in aperture and in closure must be free If stopped in any position it

must not move. During movement it must not slip.

•

Follow the dimensions, create a solid concrete footing and fix the base plate to the ground

immerging it into the concrete using the bracket clamps and fixing screws (fig.4). If the base al-

ready exists use robust expanding wedges.

•

Provide one or more pipelines for the laying of electrical cables.

N.B. IT IS NECESSARY TO KNOW THE DIMENSIONS OF THE RATCHET IN ORDER TO CAL-

CULATE WITH PRECISION THE POSITION OF THE COUNTER-PLATE.

MANUAL OPERATION

1 lock

2 unlock keys

Electrical

pipeline

Fig. 3

Fig. 4

Table des Matières

Table des Matières