Set-Up Location/Environment - Medion LIFE P66074 Mode D'emploi

3.3. Set-up location/environment

In the first few hours of use, new devices can give off a typical,
unavoidable but totally harmless smell, which wears off with
time. We recommend that you ventilate the room at regular
intervals to counteract the smell. We have taken appropriate
measures during the development of this product to ensure that
levels are well below legal limits.
WARNING!
Risk of electric shock!
Major changes in temperature or fluctuations in humidity
can cause moisture to build up within the product due to
condensation – this can cause an electrical short circuit.
 After transporting the device, wait until it has
reached ambient temperature before switching it on.
NOTICE!
Risk of damage to the device!
Unsuitable environmental conditions could cause
damage to the device.
 Use the device only in dry rooms.
 Set up and operate all the components on a stable,
level and vibration-free surface to prevent the
product from falling.
 When setting up the device, make sure that
• there is a sufficient gap to other objects and the
ventilation slots are not covered to ensure that
there is always sufficient ventilation;
• the device and mains adapter are not exposed to
direct sources of heat (e.g. radiators);
• the device and the mains adapter are not left in
direct sunlight;
• contact with moisture, water or splashes is
avoided, and that no liquid-filled objects (for
example, vases) are placed on or near the device;
DE
FR
NL
EN
81 of 96