Sharp AY-XPC12TU Mode D'emploi page 10

BASIC OPERATION
NOTE:
TIPS ABOUT AUTO MODE
• In the AUTO mode, the unit will automatically select COOL or HEAT mode by comparing the room
temperature and your desired temperature.
• The unit will automatically switch between HEAT and COOL mode to keep the desired temperature.
• COANDA button will be inactivated during AUTO mode.
RR_OM_10_lang.indb GB-6
1
Press the COOL, HEAT, AUTO or DRY
button.
• The green OPERATION lamp (
TO TURN OFF
Press the STOP button.
• The green OPERATION lamp (
2
Press the TEMPERATURE button to set
F
the desired temperature.
(COOL/HEAT/AUTO mode)
The temperature setting range:
61-86°F .
(DRY mode)
The temperature can be changed up to ±3 °F the
automatically set of temperature.
TURN
OFF
1
2
3
Press the FAN button to set the desired
fan speed.
3
• In the DRY mode, the fan speed is preset to
EN-8
: COOL
: AUTO
(Example: 3°F higher)
(Example: 3°F lower)
AUTO SOFT LOW
AUTO and cannot be changed.
: HEAT
: DRY
) will light up.
) will turn off.
F
F
HIGH
2014-02-21 08:53:30