Publicité
Approval for HVLP mandated areas for SATAjet
refer to chart below)
SATA spray gun types as listed in the chart below are approved
for sales in the HVLP mandated areas within the USA listed
on the SATA website www.sata.com/usaapprovals and are
subject to the following conditions.
■ The approvals are only valid for the spray guns listed in
the chart below under the supposition that the air pressure
supplied to the spray guns shall not exceed the maximum
inlet pressure listed in the chart.
■ Approval for the spray guns listed in the chart below is given
Spray gun type
jet X RP BASIC
jet X RP DIGITAL ready
jet X RP DIGITAL
jet X RP DIGITAL pro
SATAjet 3000 B RP
SATAjet 3000 B RP DIGITAL
SATAjet 4000 B RP
SATAjet 4000 B RP DIGITAL
SATAjet 5000 B RP
SATAjet 5000 B RP DIGITAL
SATAjet X 5500 RP
SATAjet X 5500 RP DIGITAL
SATAminijet 4400 B RP
SATAjet 100 B RP
SATAjet 100 B P
SATAjet 1000 B RP
Max. inlet pressure Additional measurement accessory required
29 psi
29 psi
29 psi
29 psi
35 psi
35 psi
32 psi
32 psi
29 psi
29 psi
29 psi
29 psi
35 psi
32 psi
32 psi
32 psi
spray guns in RP technology (please
®
within the jurisdiction of the SCAQMD for the application
of specific categories of coatings subject to Rule 1151 only
(refer to sata.com website).
The analog SATA air micrometer with gauge 0/845, product
number 27771, with color coded reading screen showing max.
29 psi with blue coding or a SATA adam (additional digital air
micrometer), shall be attached to the standard spray guns list-
ed in the chart below other than DIGITAL spray guns (see also
chart below) and be in good working condition during spraying.
[1],[4]
[1],[4],[5],[6]
[1],[4],[5],[6]
[1],[4],[5],[6]
Manometer with
[1],[2],[3],[4]
gauge [1]
‒
[1],[2],[3],[4]
‒
[1],[2],[3],[4]
SATA adam 2 [3]
SATA adam 2 mini
‒
[1],[3],[4]
‒
[1],[2],[3],[4]
[1],[2],[3],[4]
[1],[2],[3],[4]
adam X [5]
[1],[2],[3],[4]
SATA adam [2]
no longer available
adam 2 U [4]
adam X pro [6]
Publicité
