Publicité
EN
Safety
Make sure that the vibrations generated by
Î
using the device do not cause damage to
peripheral devices.
When using, always ensure that the spray gun
Î
and the object being painted are grounded.
Safety instructions for cleaning and
maintenance
When using a washing machine, only use
Î
washing machines recommended by SATA.
Disconnect the spray gun from the compressed
Î
air network before all maintenance and
cleaning work.
Ensure regular training for maintenance and
Î
repair personnel.
Use neutral cleaning agents (pH value 6 to 8).
Î
Do not use acids, caustic solutions, bases,
Î
paint strippers, unsuitable regenerates or
other aggressive cleaning agents.
Do not immerse the spray gun in cleaning
Î
agents. Cleaning agents must not enter the
air channels.
Clean holes only with SATA cleaning brushes
Î
or SATA nozzle cleaning needles. The use of
131
other utensils may cause damage or may affect
the spray pattern.
When using a washing machine, supply
Î
clean compressed air to the air channel
throughout the entire washing process.
Make sure the nozzle head is facing down-
Î
wards during cleaning.
Remove the spray gun from the gun washing
Î
machine right at the end of the cleaning
process.
Do not use ultrasonic cleaning systems to avoid
Î
damaging nozzles and surfaces.
Always ensure components are grounded.
Î
Residual risks
Serious risk of injury due to explosion
Incorrect use of the spray gun can lead to loss of
explosion protection. This can lead to explosions
with the risk of serious injury or even death.
Do not bring the spray gun into potentially
Î
explosive atmospheres of ex-zone 0.
Do not use solvents and cleaning agents based
Î
on halogenated hydrocarbons. The chemical
reactions that occur can be explosive.
Publicité
