Cassette Operation - Soundmaster Rr20 Manuel D'utilisation

1. Set the "FUNCTION" switch to the "OFF/TAPE" position.
2. Insert the prerecorded cassette into the cassette tray, and press the "PLAY" button.
3. To fast forward, press the "F.FWD" button in. To stop fast forwarding and return to the
playback mode, press the "PLAY" button.
4. To rewind, press the "REWIND" button in. To stop rewinding and return to the playback
mode, press the "PLAY" button.
5. To stop the playback, press the "STOP/EJECT" button once. To eject the cassette, press the
"STOP/EJECT" button again.
Note: Remove the cassette from the cassette holder when it is not in use.
Note: To prevent accidental recording,
break off the cassette tab from side A or
side B.
MICROPHONE to TAPE
1. Set the "FUNCTION" switch to the "OFF/TAPE" position
2. Insert a cassette tape and press the "RECORD" button to record the sounds through the
microphone.
3. To pause the recoding, press the "PAUSE" button.
4. To stop the recording, press the "STOP/EJECT" button.
RADIO to TAPE
1. Set the "FUNCTION" switch to the "RADIO" position and tune to desired station.
2. Insert a cassette tape, and press the "RECORD" button to record the sounds from the radio.
3. To record, press the "RECORD" button to start recording.
4. To pause the recoding, press the "PAUSE" button.
5. To stop the recording, press the "STOP/EJECT" button.
USB-MP3/BT to TAPE
1. Set the "FUNCTION" switch to the "MP3/BT" position.
2. Insert a cassette tape, and press the "RECORD" button to record the sounds from
"USB/BT".
3. To pause the recoding, press the "PAUSE" button.
4. To stop the recording, press the "STOP/EJECT" button.

CASSETTE OPERATION

CASSETTE RECODING
Side A
Tab for side B
3
RR20 / English Instruction Manual
Tab for side A